Hot Air Oven
Technical Specifications:» Inner chamber made of S.S. and outer made of Mild Steel with Power coating
» Gap between the walls fitted with glass wool insulation to avoid heat loses
» Heating elements are made of high grade chrome plated microme wire
» Temp. is controlled by thermostat.
» Temp. range 5°C above ambient temp TO 250°C and Accuracy : +- 2°C
» Air Ventilations are placed on top of both sides to remove hot gases / fumes.
» Heaters are placed at the right and left side of the inner chamber
» All the control switches & pilot lamps are fitted on the front panel.
Specifications:
» Inner chamber size/Dimensions: As per Customer requirement
» Inner chamber Material: Stainless Steel
» Type: Memmert type
» Digital Temperature Controller
» 3 Trays (Stainless Steel)
Peanut Crushing
Specifications:» 5 HP Stirrer with stand.
» 5 HP Crompton make motor with 2880 RPM
» MS Stand to lift machine up and down.
» Arrangement of clamps for holding the vessel
» 32 inch shaft with Impeller
» Can be hanged on your vessel
Supplied With
1) VFD with Panel Box
(MS Box duly powder coated, Provision for on/off switch, Variable Frequency Drive for controlling speed and one MCB for Overload protection)
2) SS Tank
Stainless Steel (SS316) vessel of capacity 100 Ltrs. Supplied with Fixed stand or along with castor wheels. Provision of outlet valve for removing batch.
Elmendorf Tearing Strength Tester
The Tearing Strength of Fabrics, Plastic Films or other similar material is determined by measurement of the work done in tearing through a fixed length of the test specimen using the Tearing Strength Tester.
EQUIPMENT
The Tearing Strength Testing Instruments of a Sector Pendulum Pivoted on anti-friction ball bearings on a vertical bracket fixed on a rigid metallic base. The test specimen in shape of a rectangular piece is held between two clamps, one of which is mounted on the pendulum and the other is mounted on the fixed bracket. The clamps are mounted in such a manner that their holding faces are aligned with each other when the pendulum is locked in its raised position.
The adjustable knife is also mounted on the bracket, on which the pendulum and the fixed clamp are mounted, it is centered between the two clamps for making initial slit in the test specimen. The pendulum is released by lifting a release lever. This action causes the test specimen to tear right through. The Tearing Strength is indicated on a scale fitted on the pendulum against a low friction pointer pivoted on the axis of the pendulum.
A set of CHECK WEIGHTS is supplied with the tester for verification of the Scale.
In order to increase the capacity of the Tester, augmenting weights are supplied as STANDARD ACCESSORIES for testing of low strength materials, multiple specimens may be mounted at the same time.
Technical Data
Capacity: 1600 gm/3200 gm/6400 gm
Scale reading: 0-100% of Range
GSM/GSM Balance
GSM CUTTER
Area: Sample cut 100 Sq. cm.
Accessories: Pad 1 No. & Spare Blade: 4 Nos.
Digital Weighing Scale
Model:- DB300
Cpacity:- 300.00 gms
Accuracy 0.01gm
STANDARD PACKING - MACHINE